|
When durability is important, these cold water
diesel units are the choice for airports, offshore applications and
shipyards.
|
CWC-6106-2MDK Features: |
- Four cylinder, four cycle water-cooled Kubota diesel engine
(manual dry single plate clutch, fuel injection, fuel filter with
with water separator, pressurized radiator with water circulation
pump, 12V electric starter with alternator and regulator, low tone
muffler with rain cap)
- Easily accessible control panel (water temperature gauge, oil
pressure gauge, amperage gauge, hour meter, keyed on/off/preheat
switch, glow plug light, charge lamp, engine throttle control)
- Pressure indicating gauge
- Pressure adjustable 1000 PSI through 6100 PSI by engine throttle
- Stainless-steel unloader (factory preset at 6100 PSI)
- Nickel plated manifold
- Large 20 gallon float tank (unloader bypasses to tank).
- Positive drive synchronous belt/sprocket system
- Totally enclosed powder coated steel belt guard
- Power coated heavy-duty steel channel skid frame
- Roll cage and lifting hook
- 48 inch stainless-steel lance with adjustable grip (#5.0 nozzle)
- 3/8 inch x 50 foot steel wire braided pressure hose
|
|
Specs:
CW-6106-2MDK - PSI 6100 GPM: 6.3
HP: 37.5 Engine: Kubota Pump:
General
Fuel tank Capacity (gal): 9.38 Unit Dimensions: 55"L X 42"W
X 52.5" H Shipping Weight: 1535 lbs. Net Wt. 1010 lbs.
ELECTRIC START - BATTERY INCLUDED
|
OPTIONS:
Dual lance (CW-2505 &
CW-3004) (CX-0005)
Electric Start (CW-2505 & CW-3004) (CX-004)
Roll cage (CW-2505 & CW-3004) (CX-0056) |
4000 PSI hose (CX-0006)
Low pressure detergent injection (AW-8300-0000)
High pressure detergent injection (50-0161) |
|
 |
|
This unique fold-down handle and hand carry design
is perfect when transporting and storage space is a premium.
|
CD-2003-OMHH Features: |
- Performance-proven OHV engines with low oil protection
- Direct drive triplex piston pumps with ceramic plungers
- Forged brass manifold
- Stainless-steel and brass unloader with adjustable
pressure valve
- Thermal relief valve
- Built-in adjustable low pressure detergent injection
- In-line water strainer
- Powder coated steel mounting plate with center balanced lift
(hand carry models)
- Powder coated steel frame with hose wrap and gun/wand holder
(cart mount models)
- Fold down handle (cart mount models)
- Semi-pneumatic tires (cart mount models)
- Rubber isolators
- Professional-grade insulated trigger gun with safety lock-off
- 36 inch powder coated lance with rubber grip and quick connect
nozzles (0, 15, 25 degrees) and detergent models
- 3/8 inch by 50 foot steel wire-braided pressure hose with quick
connects, swivel and bend restrictors
- One (1) year limited parts and labor warranty
- Five (5) year limited warranty on pump.
|
|
Specs:
CD-2003-OMHH - PSI 2000 GPM:
2.7 HP: 5.5
Engine: OHV Honda Pump: General
Unit Dimensions: 25"L X 15.5"W X 16.5" H Shipping
Weight: 77 lbs. Net Wt. 55 lbs.
|
|
|
|
Challenging applications call for serious equipment.
These self-contained, portable gas washers are meant for service
centers, automotive shops and other tough cleaning applications. |
HSP-3004-1MGH Features: |
- Energy efficient top fired, dual spiral coil with powder coated
heat exchanger
- No. 1 or No. 2 diesel or kerosene fired burner
- PATENTED electromagnetic firing (EMF)
system (SEE BELOW)
- Performance-proven OHV engines with low-oil protection and
recoil start
- Polyethylene burner fuel tank
- Direct drive triplex ceramic piston pump with forged brass
manifold (CAT pumps on 1MGH/1 MGV models) (AR pumps on 3MGH/3MGV
models)
- Stainless steel and brass unloader valve (adjustable on
HSP-2003-3MGH/MGV)
- Thermal relief valve
- Built-in low pressure detergent injection
- Racor fuel filter/water separator
- 3/8 inch by 50 foot steel wire-braided pressure hose with screw
connects, swivel and bend restrictors
- Professional-grade insulated trigger gun and safety lock-off
- Adjustable pressure-insulated dual lance with 15-degree fixed
and detergent nozzles
- Wand holder
- Reinforced powder coated steel tube frame with center balanced
lifting hook
- Easy coil drain
- Pneumatic tires with tubes (4)
- Solid steel threaded axles
- One (1) year limited parts and labor warranty
- Three (3) year limited warranty on coil
- Five (5) year limited warranty on pump
|
|
Specs:
HSP-3004-1MGH - PSI 3000 GPM: 3.5
HP: 11.0 Engine: Honda Pump: CAT EMF
Drive: Belt
Fuel tank Capacity (gal): 1.7 Burner Tank Capacity (gal) 5.5
Burner Cons. (gph): 2.1 Unit Dimensions: 43"L X
30"W X 41" H Shipping Weight: 551 lbs. Net Wt. 428
lbs.
|
| HOW THE EMF SYSTEM
WORKS: |
 |
- Engine sheave (dual set screw mount)
- Belt tension sheave
- Flexible drive couple protects EMF system if fuel
pump binds
- Suntec brand fuel pump
- Stator coil/ magnets provide solenoid control
voltage
- Fan provides burner air
- Ignition coil provides spark
EMF system eliminates the need for a
12V battery.
|
|
|
|
Built for longevity and reliability, these
industrial belt-driven
pressure washers are the foundation of Mi-T-M.
CW-3004-4MGH Specs:
3000/201 PSI/bar 3.5/13.3 GPM/lpm 11.0
HP
Engine: OHV Vanguard Pump: General
Unit Dim.: 48.5L x 35.5W x 30.5H
Shipping Weight: 299 lbs. Net Weight: 212 lbs. |
CW
Premium Series
Gasoline - Belt Drive |
- Performance-proven engines with low-oil protection
- Belt drive triplex ceramic plunger pump
- Quick connect nozzles (0ē, 15ē,
25ē and 40ē)
- Bypass system
- Forged brass manifold (Nickel plated brass on
CW-4004-3MV0)
- Water filter with clear sleeve for screen
inspection
- Thermal relief valve
- Stainless-steel and brass unloader mounted on
base plate
- 3/8 inch x 50 foot non-marking hose with
quick connects, swivel and bend restrictors
- Professional grade insulated trigger gun with
safety lock-off
- 36 inch steel powder coated lance with rubber
grip
- Pneumatic mag tires with tubes for longer
life
- Solid steel threaded axles
- 1/4 inch powder coated steel base plate to
reduce vibration
- Dual rubber isolators to absorb vibration
- Convenient hose wrap
- Gun/Wand holder for convenient storage
- Powder coated 1-1/4" steel tube handles to
resist breakage
- Heavy-duty dual cogged belt drive system to
prevent slippage
- Two-piece belt guard with 1/4 turn release
for quick access to belts
Two (2) year limited parts and labor warranty
Five (5) year limited warranty on pump
|
|
OPTIONS: |
- Roll cage (9.0 - 16.0 HP) (CX-0053, CX-0054, CX-0055)
- Electric Start (11.0 - 13.0 HP Honda/Vanguard) (CX-0027,
CX-0045, CX-0050,
(CX-0051)
- Dual lance (CX-0005)
- 4000 PSI hose (CX-0006)
- Low pressure detergent injector (AW-8300-0000)
- High pressure detergent injector (50-0161)
|
|
|
JP
Series
Gasoline - Direct Drive |
These contractor-grade pressure washers offer
heavy-duty components, designed to fit into your budget.
JP-3304-OMHB Specs:
3300/228PSI/bar 3.3/12.5 GPM/lpm 11.0
HP
Engine: OHV Honda Pump: AR
Unit Dim.: 33L x 22.5W x 26H
Shipping Weight: 186 lbs. Net Weight: 136 lbs. |
- Quick connect nozzles (0ē, 15ē,
25ē and detergent nozzles)
- Performance-proven engines with low-oil
protection
- Direct drive triplex piston pumps with
ceramic plungers
- Thermal relief valve
- Stainless-steel and brass unloader
- In-line water strainer
- Built-in adjustable low pressure detergent
injection
- Adjustable pressure
- Forged brass manifold
- 3/8 inch x 50 foot non-marking hose with
quick connects, swivel and bend restrictors
- Professional-grade insulated trigger gun with
safety lock-off
- 36" lance with rubber grip
- 1" powder coated steel tube handles, to
resist breakage, with gun/wand holder
- Pneumatic tires with tubes for longer life
- 3/16" powder coated steel base plates to
reduce vibration
- Dual rubber isolators to absorb vibration
- Convenient hose wrap
One (1) year limited parts and labor warranty
Five (5) year limited warranty on pump
|
|
|
|
Powerful pressure washers built with heavy-duty
components to tackle indoor industrial and agricultural applications.
JP-2503-OME3 Specs:
2500/172PSI/bar 3.2/12.1 GPM/lpm 6.0 HP
Voltage/Phase/Amp: 230V/30/14.8 or 460V/30/7.4
Pump: AR
Unit Dim.: 42L x 26W x 28H
Shipping Weight: 278 lbs. Net Weight: 197 lbs. |
JP
Series
Electric - Direct Drive |
| Features: |
- Totally enclosed fan-cooled electric motors
- Circuit breaker thermal overload protection
- 35 foot power cord (Ground fault circuit interrupter, GFCI, on
3.0-6.0 HP single-phase units only)
- Direct drive triplex piston pumps with ceramic plungers
- Forged brass manifold
- Stainless-steel and brass unloader with adjustable pressure
valve
- Thermal relief valve
- Built-in low pressure adjustable detergent injection
- In-line water strainer
- Powder coated steel handles and base plates
- Hose wrap with gun/wand holder
- Pneumatic tires with tubes
- Rubber isolators
- Professional grade trigger gun with safety lock-off
- 36 inch powder coated lance with rubber grip and quick connect
nozzles (0ē, 15ē, 25ē
and detergent nozzles)
- 36 inch by 50 foot non-marking hose with
quick connects, swivel and bend restrictors
One (1) year limited parts and labor warranty
Five (5) year limited warranty on pump
|
|
OPTIONS: |
- 460 Volt on 6.0 & 8.0 HP, three-phase models (consult factory)
- High pressure detergent injection (50-0161)
- Dual lance (CX-0005)
- 4000 PSI Hose (CX-0006)
- Low-pressure detergent injection (AW-8300-0000)
|
|
|
HG
Series
Natural Gas - Belt Drive |
This reliable series has been improved and expanded
to
include fifteen models. Use this stationary natural gas
or LP pressure washer in service centers or body shops.
HG-2004-1208 Specs:
2000/138PSI/bar 4.2/15.9 GPM/lpm 6.0 HP
Voltage/Phase/Amp: 208V/10/28.2 or 460V/30/7.4
Pump: General Nat. Gas BTU per hr: 338,000
Unit Dim.: 56.5L x 28.5W x 49.5H
Shipping Weight: 805 lbs. Net Weight: 661 lbs. |
| Features: |
- Natural gas or LP gas-fired natural draft with aspirating-type
burner, 10 inch stack
- Factory preset trapping unloader
- Thermal relief valve
- Belt drive triplex ceramic plunger pump
- Open drip-proof electric motor with thermal overload protection
- Four (4) quick connect nozzles (0ē, 15ē,
25ē, 40ē and detergent nozzles)
- 24 volt control system
- Adjustable thermostat
- Adjustable high pressure detergent injection
- Polyethylene float tank (4 gallon with
in-line screen filter)
- Electronic ignition with standing pilot light
- 1/2 inch schedule 80 coil with 7 pancake heat
exchanger
- Draft diverter included - Also features:
150ēF/66ēC maximum rise above ambient temperature control
(250ēF/121ēC outlet temperature with steam option) and pressure
switch and overpressure safety controls
- 3/8 inch by 50 foot steel wire-braided
pressure hose with quick connects, swivel and bend restrictors
- Professional-grade insulated trigger gun with
safety lock-off
- Adjustable pressure insulated dual lance with
fixed detergent nozzle
Two (2) year limited parts and labor warranty
Three (3) year limited warranty on coil
Five (5) year limited warranty on pump
|
|
OPTIONS: |
- Liquid propane (HX-0105)
- 250ē F stream upgrade (HX-0119 fits HG-1805)
(HX-0120 fits HG-2004) (HX-0121 fits HG-3004)
- Hour meter (HX-0106)
- Time delay shutdown (HX-0107)
- (1) Remote station (Auto start/stop N/A)
(HX-0108)
- Additional remotes (up to 3) (HX-0110)
- Time delay shutdown and first remote box (kit
option) (HX-0109)
- Auto start/stop (HX-0111)
- K7 unloader (Flow activated) (Auto
start/stop) (HX-0115)
- Dual gun control (HX-0113, HX-0114)
- Stainless steel lower access panels (HX-0115)
- Float tank assembly (850-0322)
|
|
|
|
PRESSURE WASHER ACCESSORIES |
|
LOW PRESSURE DETERGENT INJECTION
AW-8300-0000 |
Our low pressure detergent injector allows you to apply recommended
detergents.
AW-8300-0000
Adjustable chemical draw
Clear, pliable detergent nozzles
Solid brass body with stainless steel
orifice for durability
Quick connects for easy installation |
HIGH PRESSURE DETERGENT INJECTION
50-0161 |
With our high pressure detergent injector large tasks become
small. High pressure water mixes with detergent to clean even
the heaviest build-up.
50-0161
Brass and stainless steel construction
Adjustable metering valve
Steel mesh in-line water strainer
6.0 GPM maximum operating capacity |
Wet sandblasting is efficient and dust-free. Remove coatings
from steel and concrete surfaces.
AW-3000-0000 (Carbide Tip)
AW-3020-0000 (Ceramic Tip)
Includes sand probe and clear hose
Consult factory before ordering |
SAND INJECTOR
AW-3000-0000 (Carbide Tip)
AW-3020-0000 (Ceramic Tip)
|
Clean hard to reach places by using our extended reach wands
AW-7015-1200 (12 Foot)
AW-7015-1800 (18 Foot)
AW-7015-2400 (24 Foot)
Professional-grade trigger gun
with safety lock-off
Complete with quick connects
Extends from 6 foot to 12, 18 or 24 foot
Lightweight and easy to control
Compatible with all makes of pressure
washers rated up to 3000 PSI
Easy hose Retraction |
EXTENDED REACH WANDS
AW-7015-1200 (12 Foot)
AW-7015-1800 (18 Foot)
AW-7015-2400 (24 Foot) |
|
EXTENSION HOSES
 |
When you need extra mobility and length
COLD WATER
851-0006 (4000 PSI)
851-007 (3000 PSI)
50' by 3/8" ID
Non-marking
High pressure hoses include quick connects, swivel and bend
restrictors
Chemical resistant
Wire braided
HOT WATER
15-0146 (3000 PSI, 50' x 3/8")
15-0160 (4000 PSI, 75' x 3/8")
15-0161 (4000 PSI, 100' x 3/8")
15-0162 (4000 PSI, 150' x 3/8 ")
15-0163 (3000 PSI, 200' x 3/8")
3/8" male swivel
For use with hose reels
Easy hose retraction |
ROTARY SURFACE CLEANERS
 |
Clean large surfaces faster and easier with our rotary surface
cleaners, than with a standard cleaning nozzle. Rotary cleaners
are equipped with a strong bristle brush for long life and easy glide
action.
AW-7020-8000
18" diameter
3000 PSI rated
Heavy-duty, lightweight aluminum portable handle
Heat treated pressure swivel
Professional-grade high pressure swivel gun
AW-7020-8001
28" diameter
4000 PSI rated
Large wheels for mobility
Lightweight, portable frame with walk behind design
Professional grade aluminum housing |
Rotating nozzles increase your cleaning power and decrease your
cleaning time. They offer 0ē spray impact
with 25ē coverage. Nozzles are quick connects with filter and
offer heavy-duty components for long life and reliability.
AW-7004-Series*
5000 PSI maximum rating
AW-7300-Series*
3000 PSI maximum rating
AW-7500-Series*
* Consult factory for correct orifice size |
ROTATING NOZZLES
 |
Designed for cold water pressure washers to protect equipment.
CX-0053 (9.0 HP Gas)
CX-0054 (11.0 & 13.0 HP Gas)
CX-0055 (16.0 HP Gas)
CX-0056 (9.0 HP Yanmar)
Lifting Hook
1-1/4" tubing
Retro-fits to existing frame |
ROLL CAGE
 |
|
ROTATING BRUSH
 |
Our rotating brush offers low pressure rotation for hard to remove
debris on sensitive surfaces.
AW-7003-1500
Natural hair bristles
Quick connect
Adjustable angle
3.5 GPM flow rate
Can be used with low pressure detergent injector |
"PACK & GO" STORAGE REEL SYSTEM"
 |
Our "pack & Go" storage reel system makes hose rewinding easy with
a smooth spinning barrel and an easy grip handle. Available in
50 or 100 foot hose storage capacity.
50-0173 (50' storage reel)
50-0174 (100' storage reel)
Quick release from unit
Extends life of the hose
Convenient transport handle
Retro-fit to live system capability
Powder-coated for a longer life
1-year limited warranty |
