D200HSSV5 Specs:
Motor HP: 2 • Motor RPM 3400 • Number of Cylinders: 1
CU. FT. Displaced:  7.8 • CU. FT. FREE AIR AT 100 PSI:  4.3
LENGTH:  20"  •  WIDTH:  15"  • HEIGHT: 17"
APPROX. SHIPPING WEIGHT:  118 lbs.
 

• Choice of Oilless or Splash Lubricated Pump
• 115 V AC Motors
• Manual Reset Overload Protection
• 125 PSI Operating Pressure
• Pressure Switch with On/Off lever
• Metal Intake Filter with replaceable element on select splash lubricated models
• Regulator/Pressure Gauge
• 1/4 inch Quick Disconnect
• Initial Oil Fill Included

5520K17 Specs:
Motor HP: 1 1/2 • CU. FT. Displaced:  10.1 • CU. FT. FREE AIR AT 100 PSI:  6.9
Stage: Single • Tank Capacity (gal.): 20 • Pneumatic Wheel: Semi
LENGTH:  42"  •  WIDTH:  22"  • HEIGHT: 34"
APPROX. SHIPPING WEIGHT:  215 lbs.
 

• Splash Lubricated Pump with cast iron cylinders for longer life
• Ball Bearing Crankshaft
• Initial Oil Fill in Crankcase
• Oil Level Sight Gauge
• Oversized Flywheel for extra cooling
• Automotive Style Bearing Inserts on connecting rods
• Aftercooler
• Low RPM Ball Bearing Motors
• Thermal Protection with Manual Reset
• Totally Enclosed Two Piece Heavy Gauge Belt Guard
• Accessory Support Clip
• Choice of Start-up Control with Square D Pressure Switch or Constant Speed Operation for single stage models
• Constant Speed Control for two stage models
• Pressure Switch with On/Off Lever included on 1.5 and 2 HP models

• Dual Control for single stage models
• 20 Gallon ASME Receivers
• Dual Voltage Switch for 1.5 and 2 HP models
• Filter/Regulator/Lubricator Sets

4090HK17 Specs:
Engine:  Honda • Motor HP: 5.5 • Stage: Single • Tank Capacity (gal): 9
CU. FT. Displaced:  13.1 • CU. FT. FREE AIR AT 100 PSI:  8.9
LENGTH:  46"  •  WIDTH:  19"  • HEIGHT: 28"
APPROX. SHIPPING WEIGHT:  200 lbs.
 

• Splash Lubricated Pump with cast iron cylinders for longer life
• Ball Bearing Crankshaft
• Oil Level Sight Gauge
• Oversized Flywheel for extra cooling
• Automotive Style Bearing Inserts on connecting rods
• Aftercooler
• Idle-Down Throttle Control to reduce fuel consumption when air is not demanded
• Totally Enclosed Two Piece Heavy Gauge Belt Guard
• Accessory Support Clip
• Initial Oil Fill in Crankcase
• Schmidt Belt Tightening Device

• Base-Mounted Designs
• 20 Gallon ASME Receivers
• Filter/Regulator/Lubricator Sets

AC2-SH11-30M Specs:
Engine:  11.0 HP Honda OHV • CFM @175 PSI: 19.1 • AMPS: N/A
Stage: Two • Pump: Dari • Receiving Tank: 30 Gallon • Net Wt. 310 lbs.

• Quality two stage compressor
• Cast iron cylinder
• Aluminum crankcase
• Aluminum head for heat dissipation
• 15.7" fly wheel for extra cooling and longer life
• 14 gauge powder coated two-piece belt guard with 1/4-turn release for quick access to belts
• Powder coated ASME certified 30 gallon receiver tanks
• Two gauges for tank and outlet pressure
• Manual drain valves for proper maintenance
• Large canister intake filter
• Splash lubrication
• Includes regulator
• Two (2) year limited warranty

• Industrial UL listed electric motor
• Auto start/stop (continuous run optional)
• Stainless steel braided discharge hose

• Industrial OHV Honda, OHV Vanguard or OHC Robin engine
• Pneumatic idle control for added safety
• Stainless steel braided discharge hose

• Auto drain metal bowl (Electric) (AX-0001)
• Auto drain plastic bowl (Electric) (AX-0002)
• Manual drain metal bowl (AX-0003)
• Manual drain plastic bowl (AX-0004)
• Electric Start (battery and cables not included) (8.0 HP Honda - AX-0015)(9.0 HP Vanguard - AX-0013)(9.0 HP Robin- Consult factory)
• Electric start (battery and cables included)(8.0 HP Honda - AX-0017)
• Battery and battery cables (consult factory)
• Dual Control (Electric - AX-0009)
• Cable Throttle control (Gasoline - consult factory)
• Engine oil drain (consult factory)

AS3-VE75-80M Specs:
Engine:  7.5 HP 208-230V Electric
• AMPS: 35.0 • Stage: Two
• Pump: Schulzi • Receiving Tank: 80 Gallon Vertical • Net Wt. 407lbs.

• Industrial UL listed electric motor for a long life
• 208-230V single phase 60 Hz.
• Quality single or two stage compressor
• Cast iron cylinder
• Cast iron crankcase and head (7.5 H.P. unit)
• Aluminum crankcase and head (5.0 H.P.  units)
• Two-stage intercooler (7.5 H.P. unit)
• Large flywheel for extra cooling and longer life
• 14 gauge powder coated two-piece belt guard with 1/4 turn release for quick access to belts (5.0 H.P. units)
• 14 gauge powder coated one-piece belt guard for quick access to belts (7.5 H.P. unit)
• Powder coated ASME certified 80 gallon receiver tanks
• Auto start/stop
• Manual drain valves for proper maintenance
• Large canister intake filter
• Splash lubrication
• Two (2) year limited warranty

• Magnetic Starter
  (AC1-SE05-80M)
  (AC2-SE05-80M)
  (AS3-VE75-80M) (Consult Factory) (Not included in unit)

AS8-HE20-120M Specs:
Engine:  20.0 HP, 230V, 30 Electric • CFM @175 PSI: 54.9 • AMPS: 50.0
Stage: Two • Pump: Schulz • Receiving Tank: 120 Gallon Horizontal
Net Wt. 950 lbs.

• Industrial electric motor for a long life
• 230V three phase
• Quality two stage compressor
• Cast iron cylinder
• Cast iron head
• Cast iron crankcase
• Oil sight gauge
• 14 gauge powder coated one-piece belt guard for quick access to belts
• Two stage intercooler
• Large fly wheel for extra cooling and longer life
• Powder coated ASME certified 120 gallon receiver tanks
• Auto start/stop
• Manual drain valves for proper maintenance
• Large canister intake filter
• Splash lubrication
• Two (2) year limited warranty

• Magnetic starter
  (AS4-HE10-120M) (Consult Factory) (Not included with unit)
  (AS6-HE15-120M) (Consult Factory) (Not included with unit)
  (AS8-HE20-120M) (Consult Factory) (Not included with unit)
• 208-460V option (Consult Factory)